Epoxy Coatings

What are Epoxy Coatings?

Epoxy coatings are based on a combination of resins and hardeners that are mixed prior to application. When mixed together, the resin and hardener chemically react to produce a hard, chemical and solvent resistant finish. It is the specific selection and combination of the epoxy component and the hardener component that determines the final characteristics and suitability of the epoxy coating for a given environment. Epoxy coatings are so strong that they’re often used in the most demanding environments such as industrial environments, hospitals, or sports facilities. Epoxy coatings resistance to high levels of wear and tear, making it the most long-lasting flooring options. 

Epoxy floor coating will give any commercial or residential property’s floor a showroom shine and aesthetic that is hard to obtain with other coating solutions. What makes epoxy floor coatings one of the best floor coating out there? 

Epoxy Floor Coating Benefits!

• Seamless and easy to clean. Mop and light detergent for easy maintenance.

• Hard, durable, and abrasive resistant even with vehicular traffic.

• Oil, chemical, and stain resistant 

• Attractive and customizable.

• Slip resistant. Epoxies can have anti slip additives to create a grip and non-slip surface. 

• Seals the floor; making it virtually water proof

Epoxy Floor Coating Application Areas

If you’re looking for epoxy floor coating contractors in the Houston area, look no further. Majestic Concrete is the premier choice for garage flaked floors, metallic epoxy floors, and industrial coatings in Texas! Some of the services we provide include but are not limited to:

• Residential Epoxy Floors

• Metallic Epoxy

• Designer Epoxy

• Commercial Floors

• Industrial Floor Coating 

• Hangar Floors

Areas we service include: Houston, The Woodlands, Conroe, Magnolia, Katy, Tomball, Sugar Land, Kingwood, and College Station.

Epoxy Coatings vs. Epoxy Paints (Home Improvement Kits) for Garage Floors:

Epoxy paints which most will usually find in your home improvement store or local paint store are paints which is blended with epoxy resin and referred to as a one part epoxy paint. This is not the same as an epoxy coating which are two component and have a very high percentage epoxy solids. Generally we use a 100% solids epoxy coating which is all epoxy with no fillers or solvents. The percentage of solids mean how much of the epoxy product will be left on the actual floor after the curing process has taken place. The greater the percentage solids, the thicker the layer of protection will be left when cured. Most of the DIY kits that you find in your home improvement store are a very low solids amount, 10%-20% solids. When you apply these kits and they cure you are left with a very thin coat, versus our 100% solids applied at the same rate per gallon once cured will be 5x-10x thicker. Other major advantages to using 100% solids epoxy coating versus epoxy paint is hot tire resistance. Once you pull out a vehicle with hot tires on a DIY Kit applied to a garage floor, the paint will stick to the tire and pull right off of the concrete substrate.